... of a skilled or instructed person, and where measures to provide mechanical protection, such as those listed above, have not been applied, then cables must be both: Run in 'safe zones' (ie. run ...

... or ducting, or; be mechanically protected against damage, sufficient to prevent penetration of the cable by nails, screws and the like, or; be installed in the traditional 'safe zones' - ...

... grouped RCD protected ways in combination with one another, the required protection can be provided whilst maintaining continuity of supply to other non-affected zones within the installation  ...

... shrouds. The function of the armouring is to protect the cable against mechanical damage and to allow the cable to be run out of safe zones. Should a sharp conductive object such as a drill bit ...

... for that purpose; (b) equipment approved pursuant to regulation 20(1); (c) equipment the use of which was lawful in such zones immediately before the coming into force of these Regulations; ...

... such as those listed above, have not been applied, then cables must be both: Run in 'safe zones' (ie. run horizontally or vertically to the outlet point), and, Protected by a 30mA RCD. The ...

... sufficient to prevent penetration of the cable by nails, screws and the like, or; be installed in the traditional 'safe zones' - 150mm from the top of the wall or partition or within 150mm of an ...

... ways in combination with one another, the required protection can be provided whilst maintaining continuity of supply to other non-affected zones within the installation Much more detail required: ...

... parts but these may also be covered with PVC shrouds. The function of the armouring is to protect the cable against mechanical damage and to allow the cable to be run out of safe zones. Should a ...

... for that purpose; (b) equipment approved pursuant to regulation 20(1); (c) equipment the use of which was lawful in such zones immediately before the coming into force of these Regulations; ...