Search

Search Keyword designed Total: 11 results found.

Search Result

  1. Propeller slip rings

    Category: Electrolysis

    ... in practice we usually achieve 3 Millivolt PD. TheĀ  system of shaft bonding comprises a split slip-ring arrangement and ancillary brush gear, which is designed to facilitate ease of assembly by proficient ...
    Thursday, 10 June 2010
  2. Electrical quality and safety regs.

    Category: Electrical regulations

    ... point; (b) the earth electrodes are designed, installed and used in such a manner so as to prevent danger occurring in any low voltage network as a result of any fault in the high voltage network; and ...
    Tuesday, 11 August 2009
  3. 17th Edition

    Category: Regulations

    ... additions designed on or after 2nd July will need to comply with the new requirements. The only exception to this will be if the cables are enclosed in an earthed metallic covering / conduit ...
    Monday, 02 March 2009
  4. Ring main Good / Bad?

    Category: News

    ...  properly designed inaccordance with BS 7671, carefully installed and tested as detailed in IEE Guidancenotes 3 or the On-Site Guide. If all three were properly applied some of the disadvantages ...
    Sunday, 01 March 2009
  5. SWA as CPC?

    Category: Regulations

    ... condition. The use of bonding clamps as an alternative to glands. Bonding clamps are designed for clamping on to solid pipes. The force required to make a reliable tight joint on to a SWA cable ...
    Sunday, 01 March 2009
  6. Electrical services and safety.

    Category: News

    ... alternative cost effective solutions. We are acknowleged experts for your standby generator solution, both manual and automatic. Commercial Installations. Gadsolutions have designed and installed ...
    Tuesday, 30 November 1999
  7. Electrical quality and safety regs.

    Category: Electrical/Regulations

    ... point; (b) the earth electrodes are designed, installed and used in such a manner so as to prevent danger occurring in any low voltage network as a result of any fault in the high voltage network; and ...
    Tuesday, 11 August 2009
  8. 17th Edition

    Category: Electrical/Regulations

    ... designed on or after 2nd July will need to comply with the new requirements. The only exception to this will be if the cables are enclosed in an earthed metallic covering / conduit or equivalent ...
    Monday, 02 March 2009
  9. Ring main Good / Bad?

    Category: Electrical/News

    ... I would like to make it clear that I am not against ring circuits, there is aplace for them in modern installations provided they are properly designed inaccordance with BS 7671, carefully installed ...
    Sunday, 01 March 2009
  10. SWA as CPC?

    Category: Electrical/Regulations

    ... protective device under this fault condition. The use of bonding clamps as an alternative to glands. Bonding clamps are designed for clamping on to solid pipes. The force required to make a reliable ...
    Sunday, 01 March 2009
  11. Electrical services and safety.

    Category: Electrical/News

    ... standby generator solution, both manual and automatic. Commercial Installations. Gadsolutions have designed and installed distribution, automated control, robots and package handling systems in refineries, ...
    Tuesday, 30 November 1999
Search Parameters
Search Only: